GitLab server

GitLab server

The University provides every student with a fully working Version Control system called GitLab:

• https://fsegitlab.wlv.ac.uk/

Important: Please note that you should only use this server to store files related to University coursework. Personal or word related files should not be stored on this server.

This tutorial only acts as an introduction, please refer to the following resources for more information and further reading:

• Git documentation
• GitLab documentation

Signing in

You can sign in using your usual university credentials. Make sure that you select the "LDAP" tab on the "Sign in" screen:

Creating a project

Your next step is to create a "Project" that will contain your work. Click on the "+ New Project" button.

And populate the following fields:

• Project Name
• Description
• Visibility Level

Important: The Visibility Level should be set to "Private" for all assessment-related work. Any other Visibility Level would allow other students to look at and clone your work, which equates to Collusion under the University's Academic Misconduct regulations.

Set the Project's Visibility level to "Private" and then manually invite new project members, via the Project's settings:

Creating your first repository

When visiting your project's homepage you are presented with some Git commands that you should run to create your first repository. Please note that you get 2 access options:

• SSH
• HTTPS

We'll look that HTTPS for now, so click on the "HTTPS" button near the top.

Git commands

Your project's homepage should contain commands similars to these ones (actual details will vary):

Git global setup

git config --global user.name "in9352"
git config --global user.email "alix.bergeret@wlv.ac.uk"

Create a new repository

mkdir great-work-by-alix
cd great-work-by-alix
git init
touch README.md
git add README.md
git commit -m "first commit"
git remote add origin git@fsegitlab.wlv.ac.uk:in9352/great-work-by-alix.git
git push -u origin master

Push an existing Git repository

cd existing_git_repo
git remote add origin https://fsegitlab.wlv.ac.uk/in9352/great-work-by-alix.git
git push -u origin master

In order to run the code above you have 3 options:

• [Windows] Run "Git Bash", a Git client installed in all MI labs
• [Windows] SSH into mi-linux.wlv.ac.uk using an SSH client such as Putty
• [Linux] Boot under Linux, and open a Command window.

Git commands - details

Let's look at each command in more details:

git config --global user.name "in9352"
git config --global user.email "alix.bergeret@wlv.ac.uk"

The commands above simply set some global settings (your user name and email address) that are required for this process.

If you omit these you will get the following warning later on:

• "Your name and email address were configured automatically based on your username and hostname. Please check that they are accurate. You can suppress this message by setting them explicitly."

mkdir great-work-by-alix
cd great-work-by-alix

Well, nothing too difficult here, we simply create an empty folder and move into it. Note that you may wish to move into an existing folder that already contains files instead!

git init

Here is the first important command. git init creates an empty Git repository (on your local system). If the command is successful you should get a message stating "Initialized empty Git repository in ...". This has created a hidden ".git" folder that you can see by running the command "ls -la".

touch README.md

This command simply creates an empty test file called "README.md". If you already have files in your folder (e.g. PHP files), then you don't need to do this.

git add README.md

Second important command. git add adds a file to the repository's index. We can run this command to add our dummy "README.md" file, or any existing files you may have.

git commit -m "first commit"

Third important command! git commit records all changes to the local repository. This should be run regularly when your code is in a working, stable state. Important: for now your changes were only committing to the local repository. To commit them to the central repository you'll need the "push" command below.

Important: It is always considered good practice to type in a comment when committing code to a repository, so that other developers can read about your update. When using the command line this is done using the -m argument, as demonstrated above.

git remote add origin https://fsegitlab.wlv.ac.uk/in9352/great-work-by-alix.git

This is an optional command that create a "remote", aka an alias (or shortcut) to your lengthy repository's full address. In this case we name it "origin". So from now on we can simply refer to "origin" when working with this repository (see below!)

Note: your repository's address should contain "https://". If it doesn't then your forgot to press the "HTTPS" button earlier.

git push -u origin master

And here is the final important command! git push commits all local changes to the central repository, i.e. "origin", definied in the previous step.

The second parameter is the "branch" you want to commit to. In this case we create a default branch called "master". We'll worry about branches later.

Important: for now you will need to retype your login and password every time you want to push changes to the central repository. We'll get around this later using the SHH method instead of HTTPS.

Has it worked?

If you go back to GitLab (in your browser) and refresh your project's homepage you should now see something similar to this:

We can see 1 commit to our new branch "master". If you click on the "Files" tab at the top you will see the files you pushed earlier. In my case I pushed a file called "index.html":

Summary of important commands

Whether you use an old fashion command line Git Client or a fancy IDE, it is crucial to understand the process and the various steps required when working with git:

• git init: Creates an empty Git repository
• git add: Adds a file to the repository's index
• git commit: Commits changes to local repository
• git push: Commits changes to remote repository

Importing from repository

So far we have explained how to commit (i.e. push) changes from your local repository to the central repository. But what about the other way around? There are 2 git commands for this:

• git-pull: Pulls a copy of a project from Git repository server to the local file system and synchronize between the two. Note that in order to pull (or push) a project, you must have either created the project (e.g., using the git init command), or cloned the project (e.g., using the git clone command, see below).
• git-clone: Creates a copy of a project on your local file system. You can use this command to "import" a project from Gitlab that was not originally created by you (e.g., by your teammates.)

Cloning

If other team members wishes to work on the repository you created earlier then they will need to "clone" it first:

git clone https://fsegitlab.wlv.ac.uk/in9352/great-work-by-alix.git

The command above:

• creates a new folder
• creates the local repository
• imports all the files from the server to the local repository

You are essentially create a duplicate working copy of the project.

You might make a change to an existing file, or even add new files:

gedit index.html // make a change to the file and save

touch page2.html
git add page2.htm
git commit -m "Commit by team member"
git push -u origin master

The commands above allow you to:

• make a change to the existing "index.html" file
• create a new "page2.html" file (empty for now) and commit it locally
• push all changes back to the server

Pulling

If you already have a local copy of a repository (you either created it in the first place, or cloned it earlier), and only need to "pull" the latest changes from your team, then you'll need the "git pull" command:

git pull origin

Note: we are reusing the alias we created earlier ("origin"), which is a shortcut for our repository's URL.

The command above will important all new files and existing files that have been updated.

Working as a team

Once all developers have a local copy of your repository, it's a case of simple pulling and pushing changes to and from the central repository.

Solving conflicts

But what happens if 2 developers push a change to the same file? Well, let's take a look.

Let's imagine that our previously created file "page2.html" contains the following, very simple HTML code:

<!DOCTYPE html>
<html>
  <head>
    <meta charset="UTF-8">
    <title>My second page</title>
  </head>
  <body>
    <h1>This is our second page</h1>
  </body>
</html>

Let's imagine that 2 developers "pull" the latest code above, and then both make a slightly different change, as follow (see added paragraph):

Developer 1:

<!DOCTYPE html>
<html>
  <head>
    <meta charset="UTF-8">
    <title>My second page</title>
  </head>
  <body>
    <h1>This is our second page</h1>
    <p>Some text about something</p>
  </body>
</html>

Developer 2:

<!DOCTYPE html>
<html>
  <head>
    <meta charset="UTF-8">
    <title>My second page</title>
  </head>
  <body>
    <h1>This is our second page</h1>
    <p>Some other text about something else!</p>
  </body>
</html>

Developer 1 commits his change successfully:

git add page2.html
git commit -m "commit by team member 1"
git push -u origin master

Message received: 1 file changed, 1 insertion(+)

Then developer 2 tries to commit too:

git add page2.html
git commit -m "commit by team member 2"
git push -u origin master

But he gets an error message:

error: failed to push some refs to 'https://fsegitlab.wlv.ac.uk/in9352/great-work-by-alix.git'
To prevent you from losing history, non-fast-forward updates were rejected
Merge the remote changes (e.g. 'git pull') before pushing again.

The Git server tells developer 2 to "pull" the latest code again (which will include the change made by developer 1). Let's do that:

git pull origin

This time a warning message tells us:

CONFLICT (content): Merge conflict in page2.html
Automatic merge failed; fix conflicts and then commit the result.

Indeed when reopening his local copy of "page2.html", developer 2 is presented with the following:

<!DOCTYPE html>
<html>
  <head>
    <meta charset="UTF-8">
    <title>My second page</title>
  </head>
  <body>
    <h1>This is our second page</h1>
<<<<<<< HEAD
    <p>Some other text about something else!</p>
=======
    <p>Some text about something</p>
>>>>>>> 8c409afad98a4a8af4ac0f17a3be594802bc5895
  </body>
</html>

Working via SSH

• GitLab documentation on SSH keys