Workbook

XML and Web Services >> Workbook

Ruby install on a USB stick

1. Download the One-click ruby installer from rubyforge http://rubyforge.org/frs/?group_id=167 (warning this is a big file!). The one I used was ruby186-25.exe but there may be a later version available. To be able to run the whole environment from a USB stick I’d really recommend you have about 500MB free (maybe it’s time to buy a new stick?)
2. Double-click on the installer, after clicking next a few times, a screen like the one shown below is displayed.
   
3. Ensure you install on your USB stick, not the C drive (check the drive letter, as shown. Mine is J:, yours may vary)
4. Once Ruby is installed, open a cmd prompt (enter cmd into the ‘run’ box from the start menu) change to your ruby directory (e.g. j:\ruby ) and enter the follow command:
5. gem install rails -y
6. You may need to add the ruby directory to your system path, the setenv.bat file discussed in class will do this – the command is:
7. set path=%PATH%;j:\ruby\bin;
   1. Remember to change the drive letter (j: in the example above) to match the letter assigned to your USB stick. This will probably be different for each system – it’s a windows foible – what a wonderful system :) (maybe you should try Linux? – ok Rant over.) This is why we suggested in the lecture that you put the command above in its own file, which we called setenv.bat, so that it’s easy to change.
8. The gem command should install rails, see below for a database.

Exercises

Create one (or more) programs using ruby that can perform the following tasks:

1. Create a program that can take a phrase as input and print it out in reverse.
2. Create a program that can take a phrase as input and output it’s length as a number
3. Create an application that can encrypt any phrase you enter using the rot13 algorithm
4. Create an application that can take a temperature in F or C and convert to the other form

SQLite install on Windows

1. Download the sqlite package from http://sqlite.org/download.html (you will need a file called sqlitedll-3_x_y.zip where x and y are numbers (they change, unfortunately). For reference I used sqlitedll-3_3_17.zip when I downloaded it. The download page is shown below:
   
2. When you have downloaded the file, unzip it and extract it to a directory called sqlite on your usb stick (you may need to create this directory first.) You should then copy the sqlite3.dll file to your ruby\bin directory.
3. Next use the gem command again to install the ruby-sqlite bindings so that ruby can use sqlite. The command is given below:
4. gem install sqlite3-ruby (choose option 1 from the menu)
5. Rails apps should be stored in their own directory – I tend to call it railsapps. Create this directory on your usb stick
6. To test that rails is working properly type the following commands:
   1. cd railsapps
   2. rails mytest --database=sqlite3
   3. cd mytest
   4. ruby script/server
7. Now start IE (ugh!?!?) or Firefox (yep!) and enter localhost:3000 into the URL bar, you should see the screen below. If not, try entering http://localhost:3000/ instead.
   

MVC & Controllers

1. Using the instructions given above, create a new application called myapp, connected to a sqlite database, and cd into the directory.
2. Create a controller using ruby script/generate controller Say
3. cd into the app\controllers directory and open the say_controller.rb skeleton.
4. Add the hello class as shown below:
   
5. Create a new view template in the app\views\say directory, called hello.rhtml
6. Code is given below:
   
7. Test the above, what do you see?
8. Add a goodbye method to the say controller using the instructions above.
9. Create a goodbye view to accompany the goodbye method, but change the message to “see you later”
10. Modify the hello view to have a link to the goodbye view, example below:
    
11. What does the h helper do?
12. Create a link from goodbye back to hello
13. Investigate the formatting options/helpers available to make the time display more manageable.

Models and ORM

UPDATE: this has changed in Rails 2.0!! If you are using the latest version of rails do the following:

- create a model at the same time you scaffold by (for example) 
- ruby script/generate scaffold student name:string s_no:integer course:string 

This creates a model called student (and by convention a db table called students) with a name of type string, a s_no that is an integer and a course that is a string. Before you can use this model - you need to create the table, this you do by running rake db:migrate If all is successful when you next run your application you will have 4 pages created automatically to create, edit, update and destroy the contents of your model/db!

1. Start the application with ruby script/server, start a browser (firefox?) and navigate to http://localhost:3000/students (based on the example above)
2. Add some data by clicking on ‘new student’ and filling in the boxes that are displayed – remember to click ‘create’ after each entry.
3. What happens if you leave any field blank? Is this what you require?
4. You can add validation by editing the ruby file that wraps the database – in this case student.rb – found at K:\Documents\railsapps\myapp\app\models\student.rb. Edit this file to read as below:
   

(EDIT) - IMAGE ATTACHED TO REFLECT WHAT IS WRITTEN IN INSTRUCTIONS

1. Create a new entry, but leave the stud_no and course fields blank. What happens? Is this a useful function?
2. Experiment with the validation helpers to see if you can ensure that the student number lies within a certain range.

Views & templates

1. Create a controller called info using the ruby script command (see above). Edit the file to be as below:
   
2. This code retrieves the student info from your database and stores it in a hash called students (the @ represents an instance variable, which keeps a classes state). This will allow us to use the data in a view.
3. Next create a new view with the extension rxml – this tells rails it is a ‘builder’ class and it will automatically associate it with the builder library. Builder allows you to use ruby code to create xml files. Call the file stulist.rxml (to associate it with the controller we have already) and edit it to contain the following
   
4. This will create an xml file as shown below (depending on the data stored):
   

Rails and testing

• Rails provides a unit testing framework (actually it uses a ruby one called Test::Unit). To protect the development and production environments it uses a separate db for testing. However, as before Rails cannot create a db directly, fortunately rake can.
• Type rake db:test:prepare at the command prompt.
• Note that rails has created a test skeleton suite under the test directory, as discussed in the lecture unit tests test models, functional tests test controllers, and integration tests test flow through one or more controllers. This exercise will concentrate on unit tests, the others are left as (essential) exercises for the student.
• If we type ruby test\unit\member_test.rb (assuming we are in our application directory and we have a file called member_test.rb in the unit directory) we should see

• If you examine this file you will see it is essentially empty, however even this test demonstrates that our test db is set up and it has a schema that echoes our model (i.e. it has the right tables)
• We can test our validation as follows: - edit the test program to include a new member, as shown below

• If you run the test program what happens? You should get an output as below. Is this what you expected? Why?

• Now edit the test program and make the mem_id empty (i.e. “”). Now run the test again. What happens this time?
• You can enter data directly into the test program, or you can use fixtures.
• Open the fixtures file in the test\fixtures directory (mine is called members.yml, yours may be different). A screenshot is given below:

• Note that it already has data, and it is valid data too..

Simple Ajax 'Live Search'

This uses the observe_field helper, which is part of the prototype helper library. It is based on a very simple model, with a single controller – the controller should be able to be integrated with your existing application. This is based on an example given in Rails Cookbook by Rob Orsini, but it is very similar to the example in Agile Web development as well.

• Create new application (Rails bookstore)
• Create a model (ruby script/generate model Book)
• Create a controller (ruby script/generate controller books)
• Edit the migrate script found in app/db/migrate to be as shown below

 class CreateBooks < ActiveRecord::Migration
   def self.up
     create_table :books do |t|
     t.column :title, :string
       t.timestamps
     end
  
     Book.create :title => 'Best practice'
     Book.create :title => 'Worst practice'
     Book.create :title => 'Bling examples'
     Book.create :title => 'Best goals'
     Book.create :title => 'Best cars for under 100 quid' 
     Book.create :title => 'Worst Drivers ever '
     Book.create :title => 'Working cars'
     Book.create :title => 'Worst deals for under 100 quid'
     Book.create :title => 'Better deals'
   end
  
   def self.down
     drop_table :books
   end
 end

(you can change book titles if you like!)

• Create a layout (html file) in the views/layouts folder called books.rhtml. File contents shown below:

 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
 
 <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
   <head>
     <meta http-equiv="content-type" content="text/html;charset=UTF-8" />
     <title>BOOKS</title>
     <%= stylesheet_link_tag 'scaffold' %>
     <%= javascript_include_tag :defaults %>
   </head>
   <body>
     <%= flash[:notice] %>
     <% image_tag 'loading.gif', :id=>'spinner', :style=>"display:none; float:right;" %>
     <%= yield  %>
   </body>
 </html>

• Edit the controller (books_controller.rb) to have the content shown below:

 class BooksController < ApplicationController
 
   def index
   end
 	
   def get_results
     if request.xhr?
       if params['search_text'].strip.length > 0
         terms = params['search_text'].split.collect do |word|
         "%#{word.downcase}%"
       end
       @books = Book.find(
         :all,
         :conditions => [
         (["(LOWER(title) LIKE ?)"] * terms.size ).join(" AND "),
         * terms.flatten
         ]
         )
         end
       render :partial => "search"
     else 
       redirect_to :action => "index"
     end
   end
 end

• Create an index view (index.rhtml) in the books folder of views as below:

 <h1>Book Search</h1>
 
 Search: <input type="text" id="search_form" name="search" />
 
 <img id="spinner" src="/images/loading.gif" style="display: none;" />
 
 <div id='results'></div>
 
 <%= observe_field 'search_form',
 				   :frequency => 0.5,
 				   :update 	  => 'results',
 				   :url       => {:controller=>'books', :action=> 'get_results'},
 				   :with      => "'search_text=' + escape(value)",
 				   :loading   => "document.getElementById('spinner').style.display='inline'",
 				   :loaded    => "document.getElementById('spinner').style.display='none'"  %>

• Finally create a ‘partial’ that implements the actual search: ( this is called _search.rhtml and is stored in the views/books folder again:

  <% if @books %>
    <ul>
      <% for book in @books %>
        <li>
          <%= h(book.title) %>
        </li>
      <% end %>
    </ul>
  <% end %>		

That’s all – run your new application and watch the live search – note not a line of javascript in sight – the power of rails!

Tips & tricks

Please add to this as you find interesting or useful things

This page is useful in determining what should go where is Rails crazy dir/folder structure http://www.slash7.com/articles/2005/3/6/rails-what-goes-where

To run your application on the student server you will need to change the port number to something other than 3000. I will assign new numbers next week, but a guide on how to do this is at http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-talk/180461

Useful links for rails 2.0? Found these on a forum site, haven't tried them - it would be useful if some of you gave them a go and let the others know how they went. Link: http://railsforum.com/viewtopic.php?id=15794

Rails Screencasts Check out Ryan Bates' Railscasts.com for some (seemingly) useful Rails screencasts. I have checked out a couple of these and they seem to be quite useful as you can watch what he types while listening to the explanation. Link: http://railscasts.com

EBooks

Some good books to get hold of and download are:- Apress Beginning Ruby From Novice to Professional Mar 2007 - this starts at a real dummy level and then gets more in depth as you go along. Rails Recipes - this book is great you can look through the book for an app you want and it tells you step by step how to build it. both of these books can be *purchased* or loaned through the LC .

Some rails 2.0 tutorials: http://www.akitaonrails.com/2007/12/12/rolling-with-rails-2-0-the-first-full-tutorial

Troubleshooting

Got a problem? Found a fix? If so, why not post your problems and solutions here for others to benefit from?

Mystery Process Holds Onto WEBrick Port

This plagued me for a few days - basically WEBrick refuses to run because a mystery process is holding onto port 3000.

Run netstat in a command prompt-this shows all of the ports that are open and what processes own them. If localhost:3000 is shown then close the respective process from the task manager and reboot WEBrick. If there is no process on port 3000 then read on...

Firewall - Try adding port 3000 to the firewalls safe-list and reboot WEBrick. If this yields no result disconnect from the internet (for security reasons) and disable all firewalls (including the Windows firewall) and try again. Whether this works or not, don't forget to turn your firewalls back on before reconnecting to the internet.

Windows Live Messenger - Messenger has been known to hog port 3000 so kill it, reboot WEBrick and see if it runs. If it does you should then be able to run Messenger again alongside WEBrick.

PDA's - Do you have a PDA/phone docked and connected via MS ActiveSync? if so then this is probably your problem. Physically remove your PDA/phone from its dock and close ActiveSync. Then open the task manager (Ctrl+Alt+Del) and kill the "wcescomm.exe" process. Reboot WEBrick.

Props goto the RoR Wiki and Andre in LA for these fixes.